Brocade Communications Systems LS-STK Przewodnik Instalacji Pobierz pdf (Strona 22)

12 Brocade FastIron LS and FastIron LS-STK Hardware Installation Guide

53-1002187-01

Installation precautions

DRAFT: BROCADE CONFIDENTIAL

Lifting precautions

DANGER

Make sure the rack or cabinet housing the device is adequately secured to prevent it from

becoming unstable or falling over.

DANGER

Mount the devices in the lowest possible slots in a rack or cabinet. Place the heaviest device at

the bottom and progressively place lighter devices above.

Power precautions

CAUTION

Use a separate branch circuit for each AC power cable, which provides redundancy in case one of

the circuits fails.

CAUTION

To avoid high voltage shock, do not open the device while the power is on.

CAUTION

Ensure that the device does not overload the power circuits, wiring, and over-current protection.

To determine the possibility of overloading the supply circuits, add the ampere (amp) ratings of all

devices installed on the same circuit as the device. Compare this total with the rating limit for the

circuit. The maximum ampere ratings are usually printed on the devices near the input power

connectors.

DANGER

Disconnect the power cable from all power sources to completely remove power from the device.

DANGER

If the installation requires a different power cable than the one supplied with the device, make

sure you use a power cable displaying the mark of the safety agency that defines the regulations

for power cords in your country. The mark is your assurance that the power cable can be used

safely with the device.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 93 94

Brak uwag

Brocade Communications Systems LS-STK Przewodnik Instalacji Strona 22